# Job Arranger for ZABBIX
# This is a configuration file for Job Arranger Agent process

############ ZABBIX PARAMETERS INCLUDE #################

### Option: Include
#        You may include ONLY individual file in the configuration file.
#        Do NOT include 'all files in a directory' nor wildcard like /*.conf even in included files.
#
# Mandatory: no
# Default:
# Include=

############ GENERAL PARAMETERS #################

### Option: TmpDir
#        Used for job control data files directory. 
#        Sub directories(in,close,data,end,error,exec) are created at Agent initial execution.
#        Housekeeping(Delete old data under close) is done by jacleanup process.  
#        Do NOT use the same path as JAZ server if both are installed on the same host
#
# Mandatory: yes
# Default:
# TmpDir=
TmpDir=/var/lib/jobarranger/agent

### Option: UnixSockParentDir
#        Used for unix domain socket files directory.
#        Do NOT use the same path as JAZ server if both are installed on the same host
#
# Mandatory: yes
# Default:
# UnixSockParentDir=
UnixSockParentDir=/usr/local/bin/jobarranger/agent_socks

### Option: Server
#        List of comma delimited IP address (or hostname) of Job Arranger Server.
#        Incoming connections for Job Arranger Agent will be accepted only from the hosts listed here.
#
# Mandatory: no
# Default:
# Server=
Server=bzrzb11

### Option: Hostname
#        A list of comma-delimited, unique, case-sensitive hostnames.
#        Required for agent processing and must match the registered hostname on the server side.
#        Agent hostname is used if not specified here.
#        Allowed characters: alphanumeric, '.', ' ', '_' and '-'. Maximum length: 128 characters per hostname, 2048 characters for the entire line.
# Mandatory: no
# Default:
# Hostname=
Hostname=bzrzb11

############ ADVANCED PARAMETERS ################

### Option: AllowRoot
#        Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent
#        will try to switch to user 'zabbix(Default)' instead. Has no effect if started under a regular user.
#        0 - do not allow
#        1 - allow
#        1(allow) is required for Reboot, and for JOB to run with Run-user specified.
#
# Mandatory: no
# Default:
AllowRoot=1

### Option: ListenIP
#        IP address that Job Arranger Agent should listen on.
#        This IP address is also used as SourceIP for connecting back to Job Arranger Server upon completion of Agent processing.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0

### Option: Timeout
#        Spend no more than Timeout seconds on processing
#
# Mandatory: no
# Range: 1-300
# Default: 5 (second)
# Timeout=5

### Option: DebugLevel
#        Specifies debug level
#        0 - no debug
#        1 - critical information
#        2 - error information
#        3 - warnings
#        4 - for debugging (produces lots of information)
#
# Mandatory: no
# Range: 0-4
# Default: 3
# DebugLevel=3
DebugLevel=3

### Option: LogFileSize
#        Maximum size of log file in MB.
#        0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default: 1 (MB)
# LogFileSize=1
LogFileSize=100

############ JOB ARRANGER SPECIFIC PARAMETERS ################

### Option: LogType 
#       Specifies where log messages are written to:
#               file    - file specified with LogFile parameter
#               system  - syslog file.
#
# Mandatory: no
# Default:file
LogType=file

### Option: JaLogFile
#        Name of log file.
#        If not set, syslog is used.
#
# Mandatory: no
# Default:
# JaLogFile=
JaLogFile=/var/log/jobarranger/jobarg_agentd.log

### Option: JaPidFile
#        Name of PID file.
#
# Mandatory: no
# Default:
# JaPidFile=/tmp/jobarg_agentd.pid
JaPidFile=/var/run/jobarranger/jobarg_agentd.pid

### Option: JaServerPort
#        Specify the listening port of the job server.
#
# Mandatory: no
# Range: 1024-32767
# Default: 10061
# JaServerPort=10061
JaServerPort=10061

### Option: JaListenPort
#        Agent will listen on this port for connections from the server.
#
# Mandatory: no
# Range: 1024-32767
# Default: 10055
# JaListenPort=10055
JaListenPort=10055

### Option: JaJobHistory
#        Delete old data in job control data files directory(close) after this period passed.
#        This period should be reconsidered by a daily data amount.
#
# Mandatory: no
# Range: 1-365
# Default: 1 (Day)
# JaJobHistory=1
JaJobHistory=35

### Option: JaCleanupTime
#        Specify the jacleanup process interval time.
#        Base starting time is UTC+0, and jacleanup is performed in every this interval time from the starting time.
#        This is used only in case of JaCleanupRunTime is 24(Disabled).
#
# Mandatory: no
# Range: 1-24
# Default: 24 (Time)
# JaCleanupTime=24

### Option: JaCleanupRunTime
#        Specify the jacleanup process starting time.
#        jacleanup is performed once at this time of the day based on host local time.
#        This is used only the value is in the range from 0 to 23.
#
# Mandatory: no
# Range: 0-23 (Time)
# Default: 24 (Disabled)
# JaCleanupRunTime=24

### Option: JaExtjobPath
#        Directory to place an extended job.
#
# Mandatory: yes
# Default:
# JaExtjobPath=
JaExtjobPath=/etc/jobarranger/extendedjob

### Option: JaLogMessageFile
#        Job Arranger application log message.
#
# Mandatory: yes
# Default:
# JaLogMessageFile=
JaLogMessageFile=/etc/jobarranger/locale/agent_logmessage_64BIT.txt

### Option: JaFcopyTimeout
#        The communication timeout value for a file transfer processing.
#
# Mandatory: no
# Range: 1-3600
# Default: 180 (second)
# JaFcopyTimeout=180

## Option: JaBkupLoopTimeout
#        Specify Timeout for each process loop of backup thread.
#        backup thread  would restart on timeout.
#
# Mandatory: no
# Default:300
# JaBkupLoopTimeout=

### Option: JaExecutionUser
#        Specify the execution user of Job Arranger Agent.
#        This value is ignored in the windows version job agent.
#
# Mandatory: no
# Default: zabbix
# JaExecutionUser=zabbix

### Option: JaCommandUser
#        Specify the user to run the command.
#        You must set the "AllowRoot=1" option when using this option.
#
# Mandatory: no
# Default:
# JaCommandUser=

### Option: JaCommandPassword
#        Specify the password for Windows user run the command.
#        You must set the "AllowRoot=1" option when using this option.
#        This value is ignored in the Linux version job agent.
#
# Mandatory: no
# Default:
# JaCommandPassword=

### Option: Locale
#        Specify the locale which is unique, case sensitive
#        You can set en_US.utf8,ja_JP.utf8,ja_JP.sjis for linux agent and 65001, 932, 20932 for window agent
#        System locale is used if not specified here.
# Mandatory: no
# Default:
#Locale=

### Option: GCInterval
# Interval (in minutes) to periodically run garbage collection and
# release unused memory back to the OS.
#
# Mandatory: no
# Range: 5-60
# Default: 5
#
# GCInterval=5